Carl's Place Safety Baffle for DIY Golf Simulator Enclosure Kit

Carl's Place Safety Baffles protect the ceiling of your simulator enclosure while hitting higher shots. They are positioned across the width of your simulator enclosure on the ceiling and hang downward to catch and deflect high-angle shots that may bounce off the simulator screen.

This product is an accessory for the Carl's Place C-Series DIY Simulator Enclosure Kit with Impact Screen.

When purchasing this product, ensure that the width size you select matches the width size of your DIY Golf Simulator Enclosure Kit. If you do not own a Carl's Place Enclosure, please be aware that the Safety Baffle will be approximately 11" shorter than the listed length.

What's Included

Included with Your Purchase:

• (1) Size specific Safety Baffle that exactly match the width dimension of your Carl's Place C-Series DIY Golf Simulator Enclosure Kit

Specifications

• Safety Baffle Width: Designed to fit within the frame of the corresponding Carl's Place DIY Golf Simulator Enclosure Kit width
• Safety Baffle Height: 6"

Installation

1. Position the frame: Complete your main enclosure’s outer fabric cover and make sure your top frame pipes are accessible. Pull back any top fabric flaps if necessary.
2. Orient the baffle: Grab the Safety Baffle and make sure the matte side faces toward the front of the enclosure (the side you hit from).
3. Attach to the top pipes: Hang the baffle by looping zip-ties or ball bungees through the cord loops on the baffle, then secure them around the top horizontal or side ceiling pipes.
4. Tension and space: Stretch the baffle upward toward the frame so it hangs securely. Space multiple baffles about 1 to 1.5 feet apart (depending on your preference) to catch high-lofted wedge shots. Add extra zip-ties if more tension is needed.

See how the baffle fits into your build in these Carl’s Place enclosure assembly walkthroughs: